Skip to product information
1 of 2

Macap

M42M R Black

M42M R Black

M42M R Black is an on-demand coffee grinder from Macap with a built-in timer for perfect dosing of freshly ground coffee every time. The coffee grinder has two grind time programs, single/double, which are adjusted with high precision using the stepless grind adjustment, and continuous grinding is also available. M42M R Black can grind 2 grams of coffee per second, making it well suited for busy situations. M42M R Black is equipped with an easily accessible power switch to the right of the outlet for easy switching on and off; next to the power switch is also a switch marked T (timer setting) and M (manual).

M42M R Black has a medium-sized bean hopper with room for 500 g of espresso beans, which means that you can practically grind coffee for about 50 espressos per filled coffee grinder, although it is not recommended to fill the entire bean hopper. Only fill the grinder with an amount of coffee that you will consume in the near future (a few days), so that the coffee and its aromas are not unnecessarily exposed to oxygen.

The sleek design of the M42M R Black makes it fit very well next to any type of espresso machine. The matte black surface is both practical and aesthetically pleasing, as traces of ground coffee are barely visible on the grinder's body, which means that external cleaning is not needed particularly often. When the M42M R does need external cleaning, a damp cloth can be used without leaving visible streaks thanks to the surface coating.

The insertion of espresso beans into the M42M R Black is adjusted with a flat plate that can easily be pulled away from or towards the grinder. If you want to remove the bean hopper from the M42M R Black but there are still espresso beans left inside, you can press the flat plate in so that it covers the entire opening and then turn the bean hopper upwards. This can be done if you want to clean the grinder or suspect that a problem has arisen in the grinding mechanism.

To clean the M42M R Black, remove the bean hopper and pour a dose of Pulygrind into the grinding mechanism. Then place the bean hopper back in place. Grind out the Pulygrind crystals together with coffee until no crystals come out of the grinding mechanism; a couple of doses usually suffice. Cleaning should be done approximately once a month, but this of course depends on how well the grinder is used.

M42M R Black is equipped with flat grinding plates with a circumference of 58 millimeters that provide short grinding times and long durability. The coffee grinder's grind setting can be adjusted steplessly using a knob located at the grinder's neck. You can access the knob from both the right and left on the front and back. If you wish to make an adjustment, turn the knob a little at a time. If you turn it clockwise, the coffee will be coarsely ground, and if you turn it counterclockwise, the coffee will be finely ground. Keep in mind that the more arabica you have in your coffee blend, the finer you usually want the coffee ground to achieve the best possible result. Consequently, the opposite applies to robusta. If the coffee grinder M42M R Black is reasonably well set, usually only a small adjustment is needed. To check when the coffee grinder is correctly set, you can grind coffee for an espresso and then brew it. Experiment until the espresso is brewed at the right pace at the right time, 25 milliliters in 25 seconds is the target.

The timer setting is determined by the small wheel on the right side of the outlet marked 1-4. The higher the number, the longer the time. If the switch (T/M) is set to T (timer setting), a click on the red button indicates a single dose and two clicks are a double dose. If the switch is set to M (manual), you should hold the portafilter against the red button until the desired dose is achieved.

M42M R Black belongs to the M42 series from Macap, which is intended for semi-professional use. M42M R is the step below M42D RV. M42D RV has a higher price tag because it has a digital display that simplifies the setting of the grinder as well as the option to mount a filter holder support and coffee press. M42M R is also equipped with LED light directed down into the portafilter. This model is well suited for those who like to experiment with the grinder. M42M R is the more stripped-down model that suits those who just want to be able to grind really good coffee without having to fiddle with it.

View full details

Specifications

Artikelnummer 7692
Varumärke MACAP
Höjd mm 430
Bredd mm 194
Djup mm 308
Elanslutning 230V 10A
Bönhållare gram 500
Färg Black
Originalartikelnummer AM42MR318

Spare parts